Brass End Ring
& Hook
The end ring for 30mm Ø rope is made from solid
brass available in 4 plaited finishes and has a threaded
spike to firmly secure the rope in place. |
30mm
Ø plain rope
30mm
Ø braided rope
30mm Ø jute rope
|
|
|
|
Bob Tassel End Cap
Bob tassel end cap for 30mm Ø rope made from solid
lacquered brass fits over the end of the rope and has
a small hole in the end to thread the cord of a tassel
through so the tassel hangs down from the end of the rope.
|
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope |
| |
|
End Cap
A simple but smart end cap to finish off the end of the
rope. It has a threaded spike to firmly secure the rope
in place. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm
Ø jute rope
|
| |
|
Intermediate Support
The intermediate support for 30mm Ø rope is made
from solid brass and is available in 4 finishes. It has
a threaded spike to firmly secure the rope in place and
a 63mm single screw centred on the back plate for easy
fixing to the wall. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope
|
| |
|
Bob Brass Barrel Support
Bob intermediate barrel support for 30mm Ø rope
is made from solid lacquered brass. A more contemporary
look it can also be used with Bob Corner Mounts (below)
to fit round corners. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope |
| |
|
Bob Brass Rosette Support
Bob rosette support for 30mm Ø rope is made from
solid lacquered brass. It has decorative rosette front
and a threaded spike to firmly secure the rope in place.
A 63mm single screw centred on the back plate is used
for easy fixing to the wall. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope |
| |
|
Bob Outer Corner Mount
The outer corner mount is designed to be used in conjunction
with the following brackets to enable ropes to be fixed
around corners:
Brass intermediate support
Bob brass intermediate support
Bob barrel support
Bob rosette support. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope |
| |
|
Bob Inner Corner Mount
The outer corner mount is designed to be used in conjunction
with the following brackets to enable ropes to be fixed
into corners:
Brass intermediate support
Bob brass intermediate support
Bob barrel support
Bob rosette support. |
30mm Ø
plain rope
30mm
Ø braided rope
30mm Ø jute rope |
| |
|
)
)
)
)
)
)
)
)
